Q. How do I get into programming mode?

A. Press and hold the “P” for 3 seconds. COUNTS will be displayed. Press the arrow down key. PROGRAM will be displayed. Press the “P” key. CODE will be displayed.

From CODE, type in 1724 then press the “P” key. Display will show RECIPE. Press the “P” key and all product LEDs will light up and the display will read PRODUCT.

Q. How do I change the set temperature on my control that has a global temperature setting? 

A. With PRODUCT displayed, press the down arrow key. SET TEMP will be displayed. Press the “P” key and SET TEMP will be displayed, then the actual temperature will be shown.

To change it, use the number keys and then press the “P”. SET TEMP will be displayed. Use the arrow up key until PRODUCT is displayed.

Q. How do I change the recipe settings?

A. With PRODUCT displayed, press the key you want to change then press the “P” key. ALL will be displayed.

From ALL being displayed press the “P” key. TIME will be displayed, then the actual time will come up XX:XX. To change the time, press TOGGLE/CLEAR to zero the time out then type in the new time. Press the “P” key.

TEMP 1 will be displayed, then the actual temperature will come up XXXF. To change the temperature, press TOGGLE/CLEAR to zero the temperature out, then type in your new temperature. Press the “P” key.

TIMING 1 will be displayed, then either STRAIGHT, FLEX or SENSITIV. Use the left or right arrow keys to change between the two settings. Press the “P” key.

ALMTIME 1 will be displayed, then the actual time will come up XX:XX. To change the time, press TOGGLE/CLEAR to zero the time out then type in whatever your new time is. Press the “P” key.

ALMNAME 1 will be displayed, then the actual name will come up. Using the arrow keys, you can scroll through the library. Then press the “P” key.

HOLDTIME will be displayed, then the actual time will come up XX:XX. To change the time, press TOGGLE/CLEAR to zero the time then type in your new time. Press the “P” key.

FILTRCNT will be displayed, then the actual filter count will be shown 1-99 or NONE. Set your total filter count using the left and right arrow keys. Press the “P” key. ALL will be displayed.

Q. How do I get out of programming?

A. To exit programming, press the up arrow key and the display will show EXIT. Press the “P” key.

The Display will show PRODUCT. At this time, you can either press another key to program and follow the above programming instructions, or continue to exit by pressing the arrow up key. The display will show EXIT. Press the “P” key.

The display will now show RECIPE. Press the arrow up key again and the display will show EXIT. Press the “P” key.

Q. When I Press a Key, the Controller Does Not Respond. What Can I Do?

A. If the key is not responding, there is a chance you may have a damaged keypad. Try to reset the timer by unplugging and then as you plug the controller back in, hold down the TOGGLE/CLEAR key. If the controller is still not working, it will need to be replaced.

Q. The Display is Showing PROBE. What Does That Mean?

A. PROBE means the temperature probe is either shorted or opened and needs to be replaced.

Q. How Do I Get Into Programming Mode?

A. Press and hold the “P” for 3 seconds. Product Cnt will be displayed. Press the down arrow. Programming will be displayed. Press the “P” key. ENTER CODE will be displayed. Type in 1724 then press the “P” key. Display will show Recipe.

Q. How Do I Change the Time?

A. With Recipe displayed, press the “P” key. All product LEDs will light up and the display will read Select Product To Program. Press the key you want to change, then press the “P” key. The display will read ALL. Scroll down to Time using the down arrow key. Press the “P” key. Change the current time by using the number keys. Press the “P” key until Time is displayed. Using the arrow keys, scroll until Exit is displayed. Press the “P” key. The display will read Recipe.

Q. How Do I Exit Programming Mode?

A. With Recipe displayed, scroll down to Exit and press the “P” key.

Q. The Display is Reading PROBE OPEN or PROBE SHORT. What Does That Mean?

A. The temperature probe in the oven is either opened or shorted and needs to be replaced.

Q. How Do I Get Into Programming Mode?

A. Press the PROG key. The display will read CODE. Using the number keys, type in 1724 then press ENTER. The display will read PROD.

Q. How Do I Change the Time?

A. With PROD on the display, press the key you want to change and then press ENTER. Your current time will be displayed. Press TOGGLE/CLEAR to zero out the time then use the number keys to set a new time then press ENTER until the display reads PROD.

Q. How Do I Get Out of Programming Mode?

A. With PROD in the display, press the PROG key.

Q. When I Press a Key, the Controller Does Not Respond. What Can I Do?

A. If the key is not responding, there is a chance you may have a damaged keypad. Try to reset the controller by unplugging, and then as you plug the controller back in hold down the TOGGLE/CLEAR key. If the controller is still not responding, it will need to be replaced.

Q. The Display is Showing PROB. What Does That Mean?

A. PROB means the temperature probe is either shorted or open and needs to be replaced.

Q. My Fryer Will Not Heat, What Can I Do?

A. The first thing you would want to check is to see if the control is calling for heat. Most fryers have a heat light on the front of them that will let you know if the control is calling for heat. If the light is on, the control is working correctly. If the light does not come on, the light is either burned out or the control is defective.

 If you have another FAST controller that is working, you can take that control and try it on the fryer that is not heating correctly. If it starts to heat, then you have a defective control and it will need to be replaced. Contact FAST for a service replacement. If it still does not heat with the control you know is working, you have a problem with the fryer.

Q. How Do I Get Into Programming Mode?

A. Press the PROG key. The display will read CODE.

Using the numbered keys, type in 3124 then press ENTER. The display will read PROD.

Q. How Do I Change the Time?

A. With PROD in the display, press the key you want to change and then press ENTER. Your current time will be displayed.

Press TOGGLE/CLEAR to zero out the time, then use the number keys to set a new time. Press ENTER until the display reads PROD.

Q. How Do I Get Out of Programming Mode?

A. With PROD in the display, press the PROG key.

Q. The Display is Showing PROB. What Does That Mean?

A. PROB means the temperature probe is either shorted or open and needs to be replaced.